ガイドバー
TOP >guide bar (chainsaw)>Laminate Sprocket Nose Bar
Laminate Sprocket Nose Bar
Solid Heard Nose Bar(HEAD TIP) ・・・ the tip of a single plate of special steel welded structure is very strong carbide (HARD TIP) has. Suitable for use in harsh conditions such as cutting hard wood.

Solid Replaceable Sprocket Nose Bar(STAR TIP) ・・・ Sprocket Nose replaceable tip of a single piece of very strong special steel (STAR TIP) installed, and then smoothly guide saw-chain, losses due to friction are minimal.

Laminate Sprocket Nose Bar(TOUGH TIP) ・・・ Laminated body is welded with 3 steel plates bonded, the tip is Sprocket Nose (TOUGH TIP) with structure.
Laminate Sprocket Nose Bar
TYPE
Standard
Guide bar for consumer users, laminated structure with spot-welded 3 pieces of high quality steel plates.
The sprocket is installed on the tip of the bar.
Light weight
Light weight type bar with special hard resin installed on the bars.
This structure enables 16-22% reduction of the weight without sacrificing the stiffness.
Features
・Engine RPM is rather higher than solid hard nose bar because sprocket works to reduce frictions.

・Because of high RPM on the tip portion, lack of maintenance will be cause of the failure.
 →Refilling the grease before usage is necessary
 →To use better quality chain oil is necessary

・If sprocket will be broken, it can not be used any more.

・If the saw chain get loose, it is easy to be came off.

・Due to single solid plate structure, rigidity of the body is very high.
Inquiry for mail Inquiry for TEL
▲Back to TOP of the page